Heat Shrink GATES PowerGrip Clamps
These are the bad boys we use to hold our hoses together. they off much more gripping area then work gear clamps. Worm gear clamps also work well with our product but are not required.
Measure the OD of your hose and order the correct size. if you need assistance just put your make model in the note section when ordering and we will make sure you get the correct clamps.
| Gates # | Part# | Nom. Hose ID | Fits Hose OD |
| 32925 | SB25 | 5/8" | 15/16" to 1-1/16" |
| 32929 | SB29 | 3/4" | 1-1/16" to 1-3/16" |
| 32932 | SB32 | 7/8" | 1-3/16" to 1-5/16" |
| 32934 | SB34 | 1" | 1-5/16" to 1-1/2" |
| 32941 | SB41 | 1-1/4" | 1-1/2" to 1-3/4" |
| 32948 | SB48 | 1-1/2" | 1-3/4" to 2" |
| 32954 | SB54 | 1-3/4" | 2" to 2-1/4" |
| 32960 | SB60 | 2" | 2-1/4" to 2-1/2" |
Gates® PowerGrip® SB Clamps are maintenance-free shrink clamps that retain dynamic tension and never need retightening. Clamp down better in all conditions and temperature extremes. These hose clamps stop leaks, even on out-of-round applications.
Gates SB PowerGrip Clamp Features & Advantages:
Easy to install with ordinary heat gun
Wider sealing area entraps connector bead
Conform to any shape of hose and housing, even out-of-round fittings
Made from a heat-sensitive thermoplastic with a memory to prevent over- or under-tightening
Can be used with all brands of silicone hose
Rated for -40°F - 302°F (-40°C - 150°C)